Tagged With: door

Happy Dance!

So Happy!! Tonight I worked on getting the door lock actuator working so I could finally have my fire extinguisher effect. essentially I just replaced the weak solenoid with the awesome door lock motor that Victor recommended.  I got this one on Amazon for about $7 and free shipping! rigged up by kimncris, on Flickr … Continue reading »

Categories: adafruit, arduino, electronics, fire extinguisher, servo | Tags: , , , , , , , , , | Leave a comment

skirt attached, switches installed

I mounted up the skirt today and added my power compartment before I glued down the skirt I drilled some holes to mate with the mounting blocks drill mounting holes by kimncris, on Flickr then I glued on my thin circle of styrene. glue bottom skin by kimncris, on Flickr to temporarily set it and … Continue reading »

Categories: body, electronics, skirt, switches, wood | Tags: , , , , , , , , | Leave a comment

back door, shoulders and power coupler

while many builders are in Orlando today I drowned my sorrows in more building…. I started on the panels for the back door, tacking them together lightly with CA glue before moving on to the JB weld. ready to be jbwelded by kimncris, on Flickr I tell you this project has definitely renewed my hatred … Continue reading »

Categories: aluminum, body, frame, Paint, power coupler, shoulder, shoulder to body hubs, skins, wood | Tags: , , , , , , , , , , , , , , , | Leave a comment

more frame, skin and leg work

worked a little more on the frame today to check my pipe hole alignment I started working on the hubs. I drilled holes in the threaded part pin holes by kimncris, on Flickr after tightening down the screw end as tight as I could get it, I drilled through the holes and tapped it with … Continue reading »

Categories: aluminum, body, frame, legs, shoulder, shoulder to body hubs, skins, wood | Tags: , , , , , , , , , , , , | Leave a comment